Airblade™ technologyin a tap.
Wash and dryhands at the sink.
See it in action
Images
How to buy
With Airblade™ hand drying technology in a tap, hands can be dried at the sink in just 12 seconds. There's no need for users to move to a separate drying area, so no water is dripped on the floor.
Other hand drying methods take up valuable wall and floor space. With the Dyson Airblade Tap hand dryer, there's room for extra toilet cubicles and other facilities.
Every second, up to 35 litres of air are forced through apertures up to 0.8 mm wide. The result – 690km/h sheets of air that scrape water from hands, drying them hygienically in just 12 seconds.
Saves you money
The Dyson Airblade Tap hand dryer costs an average of just $48 to run for a year. That's up to 69% less than other hand dryers, and up to 97% less than paper towels (see calculations).
$48
per year
to run
$157
$1,460
The Dyson Airblade Tap hand dryer takes 12 seconds to dry hands. So users spend less time in the washroom, and busy periods are easier to manage.
The Dyson digital motor V4 is one of the world's smallest fully-integrated 1600W motors. It spins 90,000 times a minute, generating the power that makes Airblade™ technology possible.
Dyson Airblade Tap hand dryers uses a HEPA filter that captures 99.95% of particles the size of bacteria and viruses from the air used to dry hands. So hands are dried with cleaner air, not dirty air.
The HEPA filter removes airborne particles from the air. It has a grille to capture larger debris, a fleece layer to capture fluff and fibres, and a pleated HEPA media to capture particles as small as 0.1 microns.
Points to consider before installation
Each Dyson Airblade Tap hand dryer requires the following supply and fit specification. For more information, please download our installation advice brochure.
Dry, indoor environments only.Maximum operating elevation 2000m.
Dedicated 15amp powersupply per appliance. Correct power available to the appliance (HV 200-253v 1600)
Water pressure between 1>8 bar.1 ½ BSP pipe feed required toappliance.Water temperature controller available? (Thermostaticmixer/water heater).
AB09 / AB10 - Room under sink formotor to be mounted to surface(266mm x 142mm x 189mm)
Have you got the right type of sink?
Click the link below to see our list of approved sinks.
For more information on machine dimensions, electrical supply and construction materials, download the technical specification.
Find out recommended mounting heights, clearance distances and more installation information by downloading the technical specification.
Hands are dried in 10-12 seconds.
HEPA filters as standard
Up to 68% less than other hand dryers.
No trees cut down,no paper waste.
Parts and labour.
Dyson Airblade™ hand dryer range
Airblade™ hand drying technology in a tap.
The most hygienic hand dryer is now 35% quieter1
The fastest, most hygienic hand dryer.
Sprayed Nickel
White
Grey
Help and support for Airblade™ technology owners from aDyson Airblade™ hand dryer expert.
Buy or rent Dyson Airblade™ technology.
